manual/generic/android/ethernet
Description
Test if ethernet can be configured and works well
Maintainer
- botao.sun@linaro.org
OS
- android
Scope
- functional
Devices
- panda
- panda-es
- vexpress-a9
- vexpress-tc2
- arndale
Steps to reproduce
- Manually Configuration: Device IP: 192.168.1.7; Router (Gateway) IP: 192.168.1.1; Google DNS Server: 8.8.8.8
- After the board booted successfully, in serial console, run: # busybox ifconfig eth0 192.168.1.7 netmask 255.255.255.0 up # route add default gw 192.168.1.1 dev eth0 # setprop net.dns1 192.168.1.1 # setprop net.dns2 8.8.8.8 # setprop net.eth0.dns1 192.168.1.1 # setprop net.eth0.dns2 8.8.8.8 # busybox ping www.google.com
- Power OFF and Power ON the board again
- After the board booted successfully, enable the Ethernet (if it is not enabled) in network manager, then back to serial console and run: # busybox ifconfig -a # busybox ping www.google.com