Skip to content

manual/generic/android/wifi

Description

Test if wifi module works well

Maintainer

  • amit.khare@linaro.org

OS

  • android

Scope

  • functional

Devices

  • panda
  • panda-es
  • hi6220-hikey

Steps to reproduce

  • Plug out Ethernet cable if any, boot the board.
  • After the board booted successfully, enable WiFi via "Settings -> Wireless and Networks -> WiFi"
  • Connect to an access point(Open,WEP,WPA2).
  • To check if IP address is assigned(ADB should be connected), run "$ adb shell ifconfig wlan0"
  • To check ping command, run "$ adb shell ping www.google.com"
  • Launch web browser, access "www.google.com"