manual/generic/android/usb-tethering¶
Description¶
Test if USB tethering works well
Maintainer¶
OS¶
- android
Scope¶
- functional
Devices¶
- panda
- panda-es
- vexpress-a9
- vexpress-tc2
- arndale
Steps to reproduce¶
- Ensure there is no active network connection on host PC, plug out Ethernet cable or disable wireless adapter (if any)
- Plug in USB cable to USB OTG port on the board, then plug the other side to host PC
- Power on the board to boot into Android main screen
- Ensure network works well, in serial console, run: # busybox ping www.google.com
- Click Settings->More->USB Tethering-> Enable (If "USB Tethering" exists)
- In serial console, run: # busybox ifconfig -a
- On host PC, in terminal, run: $ ifconfig -a $ ping
- Terminate the ping command on host PC by press "Ctrl+C"
- In serial console, run: # busybox ping
- Terminate the ping command in serial console by press "Ctrl+C"
- On host PC, launch browser, access www.google.com