manual/generic/android/bluetooth-scan
Description
Test if Bluetooth scanning works well
Maintainer
- amit.khare@linaro.org
OS
- android
Scope
- functional
Devices
- panda
- panda-es
- hi6220-hikey
Steps to reproduce
- After the board booted successfully, enable Bluetooth by click Settings -> Wireless and Networks -> Bluetooth.
- After Bluetooth turned ON and surround devices (if any) showed up, turn Bluetooth OFF.
- Perform above ON and OFF procedures again.
- Make sure BT enabled device is in the radio range and in discovery mode
- Enable BT on device under test and wait for updating the list of nearby devices